Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Pad Retainers And Outer Pad Shim
5. Remove the pad shims and brake pads.
Measure Brake Pad Lining
6. Using vernier calipers, measure the thickness of each brake pad lining. The measurement does not include the pad backing plate thickness.
Specs:
Brake Pad Thickness
Standard 7.0-8.0 mm (0.27-0.31 in)
Service Limit 1.6 mm (0.06 in)
7. If the pad thickness is less than the service limit, replace the pads and shims together as a set.
8. Remove the pad retainers.
9. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
10. Check the brake disc for damage and cracks.