Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
5. Remove the bearing cap bolts.
CAUTION: To prevent warpage, unscrew the bolts in sequence 1/3 turn at a time; repeat the sequence until all baits are loosened.
6. Remove the main caps/bearings. Keep all caps/bearings in order.
7. Remove the rod caps/bearings. Keep all caps/bearings in order.
8. Lift the crankshaft out of the engine, being careful not to damage journals.
9. Remove the upper bearing halves from connecting rods and set them aside with their respective caps.
10. Reinstall main caps and bearings on the engine in proper order.
