Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
9. Apply non-hardening liquid gasket to the block mating surface of the right side cover, and install it on the cylinder block.
NOTE:
-
Use liquid gasket, Part No. 08718-0001, or equivalent.
-
Check that the mating surfaces are clean and dry before applying liquid gasket.
-
Apply liquid gasket as an even bead, centered between the edges of the mating surface.
-
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
-
Do not install the parts if 5 minutes or more have elapsed since applying the liquid gasket. Instead, reapply liquid gasket after removing the old
residue.
-
After assembly, wait at least 20 minutes before filling the engine with oil.
10. Apply non-hardening liquid gasket to the block mating surface of the oil pump, and install it on the cylinder block.
11. Install the oil screen.