acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Harmonic Balancer - Crankshaft Pulley > < Crankshaft, Engine|Removal|Page 1819
Page 4
background image

12. Apply liquid gasket on oil pump and right side cover mating areas as shown below.

13. Install the oil pan gasket and oil pan.

NOTE:  Use a new oil pan gasket.

14. Tighten bolts and nuts finger tight at six points as shown below.
15. Tighten all bolts and nuts to 12 Nm (107 in. lbs.) starting from bolt (1) clockwise in three steps.

NOTE:  Excessive tightening can cause distortion of oil pan gasket and oil leakage.

Harmonic Balancer - Crankshaft Pulley > < Crankshaft, Engine|Removal|Page 1819