Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Front Steering Knuckle: Service and Repair
Removal
TOOL REQUIRED
-
07MAC-SL00200 Ball Joint Remover, 28 mm
1. Loosen the wheel nuts slightly.
2. Raise the front of car, and support it with safety stands in the proper locations.
3. Remove the wheel nuts and front wheel.
4. Raise the locking tab on the spindle nut, then remove the nut.
5. Remove the brake hose mounting bolts.
6. Remove the caliper bracket mounting bolts, and hang the caliper to one side.
CAUTION: To prevent accidental damage to the caliper or brake hose, use a short piece of wire to hang the caliper from the undercarriage.
7. Remove the 6 mm brake disc retaining screws.
8. Screw the two 8 x 1.25 mm bolts into the disc to push it away from the hub.
NOTE: Turn each bolt two turns at a time to prevent cocking the disc excessively.
9. Remove the brake disc from the steering knuckle.
