Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
6. Hold the damper shaft with a hex wrench and tighten the self-locking nut.
INSTALLATION
1. Lower the rear suspension and position the damper with the welded nut pointed toward the front of the
2. Loosely install the two flange nuts.
3. Install the wheel sensor wire bracket.
NOTE: Be careful when installing the sensors to avoid twisting wires.
4. Raise the rear suspension with a floor jack until the car just lifts off the safety stand. The floor jack must be securely positioned or personal injury
may result.