Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
5. Install the damper mounting bolt and the flange bolt, then tighten the bolts.
NOTE: The damper mounting bolt and the flange bolt should be tightened with the damper under vehicle load.
6. Tighten the three wheel sensor wire bracket bolts (for cars with ABS).
7. Tighten the two flange nuts on top of the damper to the specified torque.
8. Install the damper access panel by aligning the tabs on the panel.
9. Install the trunk side panel (Sedan only).
10. Install the rear wheels.