Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
3. Measure the piston pin-to-piston clearance.
NOTE: Check the piston for distortion or cracks.
If the piston pin clearance is greater than 0.022 mm (0.0009 inch), remeasure using an oversize piston pin.
Piston Pin-to-Piston Clearance:
Standard (New): 0.010 - 0.022 mm (0.0004 - 0.0009 inch)
4. Check the difference between piston pin diameter and connecting rod small end diameter.
Piston Pin-to-Connecting Rod Interference:
Standard (New):
B18B1 engine: 0.013 - 0.032 mm (0.0005 - 0.0013 inch)
B18C1, B18C5 engines: 0.017 - 0.036 mm (0.0007 - 0.0014 inch)
INSTALLATION
1. Use a hydraulic press for installation.
-
When pressing the pin in or out, be sure to position the recessed flat: on the piston against the lugs on the base attachment.