Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
19. Move the steering gearbox to the left, and tilt the left side down to remove it from the vehicle.
INSTALLATION
CAUTION: Be careful not to bend or damage the power steering lines when installing the gearbox.
1. Before installing the gearbox, slide the rack all the way to right.
2. Pass the right side of the steering gearbox above and through the right side of the rear beam.
3. Hold the steering gearbox and slide the rack all the way to the right.
4. Raise the left side of the steering gearbox above and through the left side of the rear beam.
5. Install the pinion shaft grommet and insert the pinion shaft up through the bulkhead.
NOTE: Align the tab on the pinion shaft grommet with the slot in the valve body.
