Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
24. Remove the circlip and pinion shaft sleeve from the pinion shaft.
25. Using a cutter or an equivalent tool, cut and remove the four seal rings from the sleeve.
CAUTION: Be careful not to damage the edges of the sleeve grooves when removing the seal rings and O-ring.
26. Using a cutter or an equivalent tool, cut the valve seal ring and O-ring at the groove the pinion shaft. Remove the valve seal ring and O-ring.
CAUTION: Be careful not to damage the edges of the pinion shaft groove when removing the valve seal ring and O-ring.