Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Constant Velocity Joint: Service and Repair
DISASSEMBLY
1. Careful clamp the driveshaft in a vise with soft jaws, then remove the set ring from the inboard joint.
2. Remove the boot bands on the inboard joint and outboard joint.
CAUTION: Take care not to damage the boot.
-
If the boot band is a welded type or a low profile type boot band, carefully cut it off with a pair of diagonal cutters.
-
If the boot band is a double loop band type, raise the band bend as shown.
-
If the boot band is an ear clamp type (for outboard joint on the Canada model, raise the three tabs with a screwdriver.