Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
3. Mark each roller and inboard joint to identify the locations of rollers and grooves in the inboard joint. Then remove the inboard joint on the shop
towel.
NOTE: Be careful not to drop the rollers when separating them from the inboard joint.
4. Mark the rollers and spider to identify the locations of rollers on the spider, then remove the rollers.
5. Remove the circlip.
6. Mark the spider and driveshaft to identify the position of the spider on the shaft.
7. Remove the spider using a bearing remover.
