Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-1003001.png)
Crankshaft: Service and Repair
Removal
NOTE: End play for the connecting rods and crankshaft should be inspected before removing the crankshaft.
1. Remove the oil pan, oil screen and the oil pump.
2. Remove the baffle plate.
3. Turn the crankshaft so No. 2 and 3 crankpins are at the bottom.
4. Remove the right side cover.
5. Remove the bearing cap bolts.
CAUTION: To prevent warpage, unscrew the bolts in sequence 1/3 turn at a time; repeat the sequence until all bolts are loosened.
