Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-1003002.png)
6. Remove the cap bridge (B18C1, B18C5 engines only) and main caps/bearings. Keep all caps/bearings in order.
7. Remove the rod caps/bearings. Keep all caps/bearings in order.
8. Lift the crankshaft out of the engine, being careful not to damage journals.
9. Remove the upper bearing halves from connecting rods and set them aside with their respective caps.
10. Reinstall main caps and bearings on the engine in proper order.
11. If you can feel a ridge of metal or hard carbon around the top of each cylinder, remove it with a ridge reamer. Follow the reamer manufacturer's
instructions.
CAUTION: If the ridge is not removed, it may damage the pistons as they are pushed out.
