Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-1004002.png)
Service Limit: 0.010 mm (0.0004 inch)
-
Measure taper at the edges of each rod and main journal.
-
The difference between measurements on each journal must not be more than the service limit.
Journal Taper:
Standard (New): 0.005 mm (0.0002 inch) max.
Service Limit: 0.010 mm (0.0004 inch)
