acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Oxygen Sensor|Locations > < All Technical Service Bulletins for Oxygen Sensor:|01-025
Page 2
background image

Skill Level:

Repair Technician

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

1.

Make sure you have the anti-theft code for the radio.

2.

Write down your customer's radio station presets.

3.

Disconnect the negative cable from the battery.

4.

Replace the engine wire harness and the primary heated oxygen sensor (H025). Make sure all the connections are secure. Refer to the 2000 Integra
Service Manual Supplement and to the 2000 or 2001 Integra Electrical Troubleshooting Manual for details.

5.

Position the primary HO2S 4P connector pigtail so the wires going into the connector are straight, then fasten the pigtail to the wire harness with a
wire tie.

6.

Reconnect the negative battery cable.

7.

Enter the anti-theft code for the radio.

8.

Enter your customer's radio station presets. Set the clock.

9.

Test-drive the vehicle. Make sure the MIL does not come back on.

DISCLAIMER

Oxygen Sensor|Locations > < All Technical Service Bulletins for Oxygen Sensor:|01-025