Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3135001.png)
Alternator Bearing: Service and Repair
Rear Bearing Replacement
(Mitsubishi)
1. Pull off the rear bearing.
-
Make sure the tips of the bearing puller jaws are thin enough to fit between the bearing and the slip rings.
-
Do not reuse the bearing.
(Mitsubishi)
2. Use a hand press to install the new bearing. Apply pressure only on the inner race to avoid damaging the bearing.
