Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3136001.png)
Alternator Brush: Testing and Inspection
Denso
Alternator Brush Inspection
1. Remove the end cover, then take out the brush holder by removing its two screws.
(Denso)
2. Measure the length of the brushes with a vernier caliper.
Alternator Brush Length:
Standard: 10.5 mm (0.41 in)
Service Limit: 1.5 mm (0.06 in)
If the brushes are less than the service limit, replace the brush holder assembly.
