Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3137001.png)
Alternator Brush: Testing and Inspection
Mitsubishi
Alternator Brush Inspection
1. Separate the drive-end housing from the rear housing as described in rectifier removal.
2. Separate the rear housing from the stator/rectifier assembly by removing the four screws and the terminal nut from the rear housing.
Brush Length (Mitsubishi)
3. Measure the length of the brushes with vernier calipers.
4. If the brushes are less than the service limit, replace them.
