Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3152001.png)
Brush Holder: Testing and Inspection
Starter Brush Holder Test
1. Check that there is no continuity between the + and - brush holders.
If there is continuity, replace the brush holder assembly.
2. Insert the brush into the brush holder, and bring the brush into contact with the commutator, then attach a spring scale to the spring.
Spring Tension
Measure the spring tension at the moment the spring lifts off the brush.
