Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3412017.png)
49. Install the valve body unit on the gearbox housing by engaging the gears. Tighten the flange bolts to the specified torque.
NOTE: Note the valve body unit installation position (direction of pipe connection).
50. Install the cylinder lines A and B.
NOTE:
-
Clean the joints of the cylinder line A and B thoroughly. The joints must be free of foreign material.
-
Install the cylinder line A and B by tightening the flare nuts by hand first, then tighten the flare nuts to the specified torque starting with the
cylinder side nuts.
51. Grease the sliding surface of the rack guide and install it onto the gearbox housing.
52. Install the spring, rack guide screw and locknut on the gearbox housing.
53. Adjust the rack guide screw.
