Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
Differential: Service and Repair
BACKLASH INSPECTION
1. Place the differential assembly on V-blocks and install both axles.
2. Check backlash of both pinion gears,
Standard (New): 0.05 - 0.15 mm (0.002 - 0.006 inch)
3. If the backlash is not within the standard, replace the differential carrier.
BEARING REPLACEMENT
NOTE: Check the bearings for wear and rough rotation. If the bearings are OK, removal is not necessary.
1. Remove the ball bearings using a bearing puller.