Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2735002.png)
2. Install the new ball bearings using the special tool with a press as shown.
DIFFERENTIAL CARRIER REPLACEMENT
1. Remove the final driven gear from the differential carrier.
NOTE: The final driven gear bolts have left-hand threads.
2. Pry the snap ring off differential carrier, then remove the speedometer drive gear and 5 x 10 mm roller.
3. Install the 5 x 10 mm roller in the differential carrier.
4. Install the speedometer drive gear with its chamfered side facing the carrier. Align the cutout on the bore of the speedometer drive gear with the 5
