Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2875003.png)
7. Remove the spider using a commercially available bearing remover.
8. Wrap the splines on the driveshaft with vinyl tape to prevent damage to the inboard boot and dynamic damper.
9. Remove the inboard boot and dynamic damper. Take care not to damage the boot and dynamic damper.
10. Remove the vinyl tape.
Outboard Joint Side:
1. Lift up the three tabs with a screwdriver, then remove the boot bands. Take care not to damage the boot and dynamic damper.
