Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2882003.png)
14. Remove the hub unit from the knuckle.
INSTALLATION
1. Install the hub unit, spindle washer and brake disc.
NOTE:
-
Wash the bearing and spindle thoroughly in high flash point solvent before reassembly.
-
Before installing the brake disc, clean the mating surfaces of the rear hub and the brake disc.
2. Install the brake caliper with the caliper bracket mounting bolts.
3. Install the brake hose with the brake hose mounting bolt.
CAUTION: Be careful not to twist the hose more than necessary.
