Legend V6-2494cc 2.5L SOHC FI (1986)
Weatherstrip: All Technical Service Bulletins
Drip Seal - Torn
September 22, 1986
YEAR
MODEL
APPLICATION
1986
LEGEND
ALL
86-013
Torn Drip Seal
PROBLEM
The drip seal has been torn by the rear edge of the front door sash upper molding.
CORRECTIVE ACTION
1.
Check for proper door alignment. If adjustments are necessary, refer to Service Manual page 20-13.
2.
Remove the torn drip seal.
3.
Using a hammer and a wood block, bend 6 inches of the flange (3 inches on either side of the point of contact) downward 1/16 inch.
