Legend V6-2494cc 2.5L SOHC FI (1986)
5.
Remove the two original large white plastic fasteners from the body and replace them with two of the four new large white fasteners provided in
the kit. Apply the two additional fasteners in the locations shown in the illustration.
6.
Fit the corner moldings into the new upper molding.
7.
Apply, 3M Super Weatherstrip Adhesive (P/N 08008) to the undersides of the upper and corner moldings, as well as their contact surfaces on the
body.
8.
Install the upper and corner molding assembly with the help of an assistant:
^
Slide the lower ends of the corner moldings into place.
^
Push the upper molding onto its clips.
PARTS INFORMATION
Rear window upper molding kit:
P/N 73270-SD4-305
WARRANTY CLAIM INFORMATION
Operation number:
832150
Flat rate time:
0.4 hour Failed P/N: 73251-SD4-003
Contention code:
A02
Defect code:
061