Legend V6-2494cc 2.5L SOHC FI (1986)
Weatherstrip: All Technical Service Bulletins
Rear Window - Upper Molding Loose
September 22, 1986
YEAR
MODEL
APPLICATION
1986
LEGEND
ALL
86-012
Rear Window Upper Molding Loose
CORRECTIVE ACTION
Install a rear window upper molding kit (listed under parts information):
1.
Remove the rear roof moldings from above the rear window by prying up on their forward edges.
2.
Remove the corner molding using a molding clip release tool (see the '86 Legend Service Manual, page 20-17, for dimensions of one type):
^
Slide the tool under the upper forward edge of the molding, and release the upper clip.
^
Slide the comer molding up and toward the front of the car to release it from the side clip.
3.
Remove the upper molding.
4.
Replace the five original blue upper molding clips with the new blue clips provided in the kit.