Legend V6-2494cc 2.5L SOHC FI (1986)
Disassembly/Inspection
Compress the damper spring using the spring compressor, then remove the self locking nut.
CAUTION: Do not compress the spring more than necessary to remove the nut.
2. Remove the spring compressor then disassemble the damper as shown in the next column.
3. Check for smooth operation through a full stroke, both compression and extension.
4. Also check for smooth operation in short strokes of
5-10cm (2-4 in.). Replace the damper if resistance is uneven or jerky.
5. Check for oil leaks, abnormal noises or binding during these tests.
