Legend V6-2494cc 2.5L SOHC FI (1986)
3. Compress the damper spring.
4. Install the mounting rubber, mounting washer and 10 mm self locking nut.
5. Hold the damper shaft and tighten the 10 mm self locking nut.
Installation
1. Loosely install the damper on the frame with the aligning tab facing inside.
2. Install the damper fork on the driveshaft and lower arm. Instal the damper in the damper fork so the aligning tab is aligned with the slot in the
damper fork.
3. Raise the knuckle with a floor jack until the car just lifts off the safety stands.
NOTE: The damper fork bolt should be tightened with the vehicle on the ground.