Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
22.
Set your DVOM to ohms, then disconnect the 6-P connector from the control box, and the 2-P connector from the microphone. Check for
continuity between terminal 2 of the 2-P connector and terminal 5 of the 6-P connector.
Is there continuity?
Yes - Go to the next step.
No - Repair open wire; check the white wire in the 3-P connector at the control box.[ ]
23.
Backprobe the 14-P control box connector at terminal 4 and check continuity to ground.
Is there continuity?
Yes - Replace the control box.[ ]
No - Go to the next step.
24.
Disconnect the 14-P control box connector and the 25-P transceiver connector. Then check for continuity between terminal 4 of the 14-P
connector and terminal 14 of the 25-P connector.
Is there continuity? Yes - Replace the transceiver.[ ]
No - Go to the next step.
25.
Check the connections at both DIN connectors (one at the control box, one at the transceiver).
Are the DIN connectors OK?
Yes - Repair/replace the open wire between the 25-P transceiver connector and the 14-P control box connector.[ ]
No - Repair the faulty DIN connectors.[ ]
The [ ] "symbol indicates the end of troubleshooting for this symptom.
