Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
Yes - Replace the transceiver harness.[ ]
No - Replace the transceiver.[ ]
16.
Disconnect the 25-P connector from the transceiver, and the 14-P connector from the control box, and then check continuity between these
terminals:
^
Between terminal 8 at the 25-P connector and terminal 13 at the 14-P connector.
^
Between terminal 1 at the 25-P connector and terminal 8 at the 14-P connector.
^
Between terminal 23 at the 25-P connector and terminal 14 at the 14-P connector.
Is there continuity in all three wires?
Yes - Go to the next step.
No - Repair open(s) in wire(s).[ ]
17.
Disconnect the 1 0-P connector from the control box and check continuity between these terminals: