Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
13.
Check continuity from terminal 6 at the DIN connector to terminal 1 at the 25-P connector.
Is there continuity?
Yes - Go to the next step.
No - Replace the transceiver harness.[ ]
14.
Check continuity to the DIN cable ground shield from all terminals in the DIN connector.
Is there continuity to ground at any terminal?
Yes - Go to the next step.
No - Replace the transceiver harness.[ ]
15.
Check continuity from each terminal in the DIN connector to each of the other terminals as follows:
Is there continuity between any of the terminals?
