acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Sun Shade:|88022|Page 6710 > < Customer Interest for Sun Shade:|88022
Page 1
background image

Sun Shade: Customer Interest
Sunshade - Rattle

March 9, 1988
YEAR

MODEL

APPLICATION

'86-88

LEGEND

ALL

88-005

Sunshade Rattle (Supersedes 88-005, dated February 16, 1988)

SYMPTOM A rattle from the sunshade, most noticeable when driving on a rough road.

PROBABLE CAUSE The sunshade is loose in the guide rail.

CORRECTIVE ACTION
^

Reinforce the guide tab on each front corner of the sunshade with EPT sealer.

^

Apply Tricot tape to the outer edges of the sunshade.

^

On the '86 & 87 4-door only, install EPT "spacers" between the sunshade and the sunroof frame.

1.

Remove the sunroof glass and sunshade, as described in the service manual.

NOTE:

When removing the sunroof glass, make note of the number and position of the sunroof shims; reinstall them in their original positions.

2.

Using a thin flat screwdriver, fit a small piece of EPT 3T sealer under the guide tab on each front corner of the sunshade, as shown.

CAUTION: Fit the EPT sealer carefully; the tab is plastic and easily broken.

3.

Clean both sides of the sunshade using alcohol.

4.

Mask off both sides of the sunshade 10 mm from the edge.

5.

Apply 3M Plastic & Emblem Adhesive (3M part number 08061), or equivalent to both sides of the sunshade, then remove the masking.

Customer Interest for Sun Shade:|88022|Page 6710 > < Customer Interest for Sun Shade:|88022