Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
18.
Remove and discard the modulator reservoir O-rings. Coat new O-rings with clean brake fluid, then install them on the reservoir. Reinstall the
reservoir on the solenoid head.
19.
Reconnect the solenoid connectors. Reinstall the relay box, pump relay, solenoid connector bracket, and horn bracket.
20.
Refill the modulator reservoir to the MAX level.
21.
Connect the ALB Checker and turn the Mode Selector to "1." Start the engine and release the parking brake. Push the Start Test button on the
ALB Checker.
22.
Refill the modulator reservoir to the MAX level. Run through modes 3 and 6 with the ALB Checker, then bleed the high pressure fluid from the
maintenance bleeder with the ALB Bleeder T-Wrench. Repeat this three or four times.
23.
After bleeding the high pressure fluid the last time, run through mode 1 with the ALB Checker, then refill the modulator reservoir to the MAX
level.
