Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
Fig. 6 Connecting charging system analyzer
5.
Connect Sun VAT-40 charging system analyzer or equivalent to system as shown in Fig. 6, then position selector switch in No. 1 position.
6.
With all accessories Off, start engine, move selector switch to No. 2 position, then remove inductive pickup and zero ammeter.
7.
Reconnect inductive pickup, ensuring arrow on pickup points away from battery.
Fig. 3 Alternator test specifications. Legend
8.
Ensure cooling fans are off, accelerate and hold engine at 2000 RPM, then apply a load with carbon pile so that voltage drops to no less than 12
volts. Check maximum amperage reading and compare to specifications, Fig. 3. Subtract 5 to 10 amps from reading to allow for engine
