Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Brake Fluid Accumulator: Service and Repair
Relieving Pressure
Fig. 62 System Air Bleeding
Fig. 63 System Air Bleeding
1.
Drain brake fluid from master cylinder and modulator reservoir.
2.
Remove red bleeder cap from power unit, Fig. 62 and 63.
3.
Install ALB T-wrench, 07HAA-SG00100, on bleeder screw, about 90°, to collect high pressure fluid in reservoir. Turn T-wrench one complete
turn to drain brake fluid.
4.
Torque bleeder screw to 4 ft. lbs., discard fluid, then install red bleeder cap.
