Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Cabin Temperature Sensor / Switch: Testing and Inspection
NOTE: It is not necessary to remove the sensor from the control panel to test it.
Compare the resistance reading between No. 1 and No. 2 terminals of the in-car temperature sensor with specifications shown in the graph: It should be
within specifications.
CAUTION: The sensor uses a thermistor which can be damaged if high current is applied to it during testing. Therefore, use a circuit tester that puts
out a measuring current of 1 mA or less. (At the 20 K Ohm range)