Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
13. Check the pinion lower ball bearing for play; if it is good go on next step.
If the bearing is noisy or has excessive play, or the grease is contaminated, replace the pinion assembly.
14. Remove the four bolts from the end of the cylinder housing, then slide the housing off the rack.
15. Remove the O-ring, back-up ring, rack bushing A and cylinder spring.
16. Remove the cylinder end seal from the cylinder housing.
NOTE: Use your fingers or a wooden stick to avoid damaging the housing.
