Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
44. Wrap the end of the steering rack with vinyl tape. Coat the tape with grease.
45. Coat the inside surface of the cylinder with power steering fluid and install the cylinder end seal with its grooved side facing out.
46. Coat the new O-ring with the grease, then install the O-ring and back-up ring on the gear housing.
47. Carefully position the cylinder housing on the gear housing and loosely install with four bolts.
CAUTION: Be careful not to damage the end seal in the cylinder housing.
48. Remove the vinyl tape from the steering rack.