MDX V6-3.7L (2007)
9. Remove the screws, then remove the grip (A), armrest assembly (B), armrest cover (C), and the wood trim (D) from the door panel (E).
10. Remove the screws (A, B), then separate the armrest (C), the power window switch panel (D), and the power window switch (E).
11. Install the door panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Replace any damaged cable fasteners with new ones.
-
The latch cable (A) should be fixed to the cable fastener (B) with the latch in the unlocked position as shown.