MDX V6-3.7L (2007)
6. Disconnect the door subharness connector (A) and power mirror switch connector (B), then remove the door panel (C).
7. Remove the latch cable fastener (A) from the inner handle (B), and then disconnect the latch cable (C) from the cable fastener (D). Disconnect the
inner handle cable (E) from the cable fastener (F), then remove the inner handle.
NOTE: Check if the cable fasteners are damaged or stress-whitened.
8. Disconnect the power window switch connector (A), and on the driver's side, disconnect the power door lock switch connector (B) and the seat
position memory switch connector (C).