MDX V6-3.7L (2007)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Removal/Installation - Tailgate Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the tailgate upper trim panel (A).
1. Detach the hooks (B) and tabs (C) from the left tailgate side trim (D) and right tailgate side trim (E).
2. Pull the tailgate upper trim panel back by hand to detach the clips, then remove it.
2. Remove the left tailgate side trim (A) and the right tailgate side trim (B).
1. Pull out the top of the side trim to detach the clips.
2. Detach the tabs (C) and hooks (D) from the tailgate lower trim panel (E).
