MDX V6-3.7L (2007)
7. Release the fastener (A) on the front edge of the carpet (B), then pull back the carpet from under the dashboard.
8. Remove the carpet.
9. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harnesses (A) are routed correctly.
-
Slip the slits (B) in the carpet over the rear heater duct (C) and the third row seat heater duct (D).
-
Slip the carpet under the center console, both B-pillar lower trim, and both rear side trim panels properly.