MDX V6-3.7L (2007)
1. Detach the hooks (A) and tabs (B) from the B-pillar lower trim (C) and rear side trim panel (D), and pull the rear door sill trim (E) up by hand to
detach the clips (F, G), then remove it from the rear door opening seal (H).
2. If necessary, pull the rear side outer trim (I) up to detach the clips (J), then remove the trim.
3. Pull out the rear door opening seal (A) from the trim hooks (B) and around the rear door opening flange, then remove the seal.
4. Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and hooks into place securely.
