MDX V6-3.7L (2007)
7. Pass the front seat belt (A) lower anchor out through a hole in the slider (B), then remove the B-pillar upper trim (C).
8. Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged clips (A) with new ones.
-
If the side curtain airbag has deployed, replace the B-pillar upper and lower trim and all clips on the trim with new ones.
-
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the trim and replace it if it has any of these
