MDX V6-3.7L (2007)
16. Reinstall the quarter pillar trim (A).
1. If equipped with the premium sound system, reconnect the D-pillar speaker connector (B).
2. If equipped with power tailgate, pass the power tailgate rod (C) through the slit (D) in the quarter pillar trim.
3. Place the trim over the C-pillar/D-pillar (E), and fit its upper clip (F), and all of the other clips (G) into holes (H) in the body, then lightly push
the trim into place.
NOTE:
-
Make sure the side curtain airbag isn't tucked down under the clips and ribs.
-
Apply pressure to the areas of the trim on the upper clips until these clip fittings are felt. If you push too hard, the clip will be damaged,
and it will not hold the trim properly.
-
Make sure the upper clip portions of the trim don't come off the body by tugging on the trim.
17. With power tailgate: Set the clip (A) on the original position, then reattach the power tailgate rod (B) on the pivot bracket (C) by pushing the rod
onto the pivot.
18. Reinstall all of the removed parts.
