MDX V6-3.7L (2007)
Power Seat Motor: Service and Repair
Front Seat Recline Motor Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE: Put on gloves to protect your hands.
1. Remove the front seat.
2. Remove these items:
-
Seat-back cover
-
Lumbar support motor cover
3. Driver's seat: Disconnect the lumbar support motor connector (A), and remove the wire ties (B).
4. Release the push nut (A) from the motor side end of the connecting rod (B), gently tap on the motor side of the connecting rod to remove it from
the recline motor (C) and both recline adjusters (D).
5. Remove the rod cover (E).
6. Remove the bolt, then remove the recline motor (A).
7. Install the motor in the reverse order of removal, and note these items:
-
Passenger's seat: Calibrate the ODS unit.
-
Replace the wire ties you removed with new ones.