MDX V6-3.7L (2007)
11. Install the cover in the reverse order of removal, and note these items:
-
Reinitialize the ODS unit.
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips, hooks,
and hook strips.
-
Replace any clips you removed with new ones (A). Install them with commercially available upholstery ring pliers (B).
-
Reinstall the front hook (C) and rear hook (D) of the reinforcing cloth (E) securely.
-
Use only original Acura replacement seat-back covers.
-
Make sure the recline motor harness/lumbar support motor harness (driver's seat) or recline motor harness (passenger's seat), side airbag
harness, seat-back heater harness, and ODS unit harness (passenger's seat) are routed properly.
-
Replace the back panel clips with new ones.
