MDX V6-3.7L (2007)
14. Right second row seat: If necessary, remove the seat-back damper (A) from the seat-back frame.
15. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks, hook
strips, and clips.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
-
Replace the wire ties you removed with new ones.
-
With seat heater: Make sure the seat heater connector is plugged in properly.
Seat Cushion Cover
1. Remove the second row seat.
2. Remove the recline outer cover:
-
Left second row seat.
-
Right second row seat.
